Instructions:
      1) set iron to 350F, cotton
      2) place transfer on shirt and cover with white paper
      3) place white paper inside shirt to prevent glue melt onto other side
      4) apply firm pressure, 7-10 sec.
      5) wait 5sec, then remove inside shirt paper


      *Can also be applied on any fabric or porous surface material
      *Can be applied to smooth surface material with 2-part epoxy,
      tip: to keep epoxy from hardening use a cold upside down soda can to mix epoxy,
      place transfer on cold flat surface, and apply small beads of epoxy, then, apply to
      desired surface!